Hydraulic Bike Brakes Maintenance - The Right Guidelines For Maintenance - mydirtbike.net

Hydraulic Bike Brakes Maintenance – The Right Guidelines For Maintenance

hydraulic bike brakes maintenance

Cycling or biking is always fun and keeps your body healthy, but when you are buying a bike, the type of brake that the bike has is really important. Brakes may not appear that important to you, but they make a great difference in your cycling experience. There are two types of brakes. One is the mechanical brake that works with cables. Another is hydraulic bike brakes, in which cables are replaced by hydraulic fluid in a fully sealed line. Hydraulic Bike Brakes Maintenance is necessary to help you go faster and stop harder.

Hydraulic Bike Brakes Maintenance

A close up of a bicycle

In the hydraulic brakes, when you pull the brake lever, the fluid which is compressed will run down to the brake caliper. Then the brake pad will be compressed to the wheel’s rim. In this whole process, brake cables are not involved. Hydraulic bike brakes are commonly used for mountain bikes.

We need to keep in mind that breaks also need maintenance to be used for a long time. Hydraulic Bike Brakes Maintenance is required when the brake pads are worn out. Hydraulic Bike Brakes are beneficial to those who don’t have much power in their hands as there is no need to pull hard on the brake lever.

Benefits Of Hydraulic Bike Brakes

A wooden table

Some people would say that mechanical Bike Brakes are better, But Hydraulic Bike Brakes have their advantages. While mechanical bike brakes are heavier and need more maintenance, hydraulic bike brakes are lighter and are more likely to last longer. They need less maintenance, as well. Hydraulic Bike Brakes Maintenance gives you more brake power. Even though Hydraulic Bike Brakes Maintenance is a bit costlier, it is required once in six months.

Necessity Of Hydraulic Bike Brakes Maintenance

Continuous use over time will make the brake fluid contaminated with moisture and dirt. Therefore, from time to time, there is a need for Hydraulic Bike Brakes Maintenance. It is important to choose the correct fluid for the specific brakes. Some companies use automotive brake fluid, whereas some use mineral oil as fluid. Hydraulic Bike Brakes Maintenance involves inspection of all fittings and hose connections for seepage and fluid leakage. It also includes the caliper’s alignment to the rotor as it is important for the brakes’ performance. It is also crucial to change the brake pads from time to time as they become thin with use. Hydraulic Bike Brakes Maintenance also involves the bleeding, which means removing the air trapped from the line and caliper.

Things To Avoid

Do not spray lube or any other form of cleaner near your rotor or pads as it will contaminate them, which will result in loss of braking power and an irritating amount of noise. Secondly, avoid using the wrong rotor or brake pad compound combination. Another important thing to remember is to use the correct fluid for your brakes. If the wrong type of fluid is used, then there is a chance of seal failure, which can result in brake failure. Ensure that the surrounding is clean when you are bleeding the brakes after bleeding clean everything carefully, as the fluid is corrosive and can ruin the paint of the bike if left on it.


Thus, Hydraulic Bike Brakes Maintenance can help your bike run faster. It is required once in six months. If you are planning to do Hydraulic Bike Brakes Maintenance on your own, then there are some things that you need to remember, like bleeding in a clean surrounding, using correct fluid, etc.

Subscribe to our monthly Newsletter